Toplift spreader ELME 817/SANY SDJ450G er kompatibel med SANYs medium store Reach Stacker-modell. Reach Stackeren har en akselavstand på 6,5 meter og tilbyr en løftekapasitet på 45 tonn. Den er designet for effektiv stabling og håndtering av containere.
Her er funksjonene og spesifikasjonene til SANY Reach Stacker med Toplift-sprederen ELME 817/SANY SDJ450G:
Kombinasjonen av SANY Reach Stacker og Toplift-sprederen ELME 817/SANY SDJ450G gir en allsidig løsning for stabling og håndtering av containere. Den gir nødvendig løftekapasitet og funksjoner for effektiv håndtering av containere i ulike stabelkonfigurasjoner og trange områder.
Lifting capacity in first/second/third row: 45 t / 31 t / 15 t
Wheelbase: 6,000 mm
Engine: Volvo Penta TAD 1171VE
Exhaust emission level: EU Tier IV
Rated power: 265 kW at 1,450-2,100 rpm
Torque: 1,785 Nm at 1,260 rpm
Gearbox: Dana HR36000, PowerShift fully automatic gearbox with torque converter
Operating weight: 75,500 kg
Max. lifting capacity: 45 t
* with participating partners
DIMENSIONS | |
Overall length | 11,340 mm |
Wheelbase | 6,000 mm |
Height incl. rotating beacon | 4,770 mm |
Ground clearance | 300 mm |
Height to top of boom | 4,570 mm |
Seat height | 2,504 mm |
Overall width | 6,042-12,175 mm |
Total width at front | 4,188 mm |
Total width at rear | 3,310 mm |
Track width at front | 3,033 mm |
Track width at rear | 2,790 mm |
Movable counterweight stroke | 500 mm |
Turning circle | 8,285 mm |
Travel of movable cab | 11,300 mm |
Aisle width with 20′ container | 13,600 mm |
Travel of movable cab | 2,500 mm |
POWERTRAIN | |
Engine type | VOLVO TAD 1171VE |
Rated power | 265 kW/2,100 rpm |
Max. torque | 1,750 Nm/1,260 rpm |
Emission standard | EU Tier IV |
Gearbox type | DANA HR36000 |
No. of gears | F4/R4 |
Drive axle | Kessler D102 |
Tyre size | 18.00×25 |
WITH SANY SDJ 450G TOPLIFT SPREADER | |
Side thrust +/- | 800 mm |
Rotation angle +/- | 105/195 ° |
Mechanical slope compensationh +/- | 2/2 ° |
Spreader weight | 7,900 kg |
Weight increase with 30´ stop | 400 kg |
WITH ELME 817 TOPLIFT SPREADER | |
Side thrust +/- | 800 mm |
Rotation angle +/- | 195/105 ° |
Mechanical slope compensationh +/- | 2/2 ° |
Spreader weight | 9,300 kg |
Weight increase with 30´ stop | 700 kg |
BOOM | |
SANY toplift spreader lifting height | 15,100 mm |
ELME toplift spreader lifting heigh | 15,250 mm |
SANY spreader min. height | 1,120 mm |
ELME spreader min. height | 1,270 mm |
Boom angle | 0-60 ° |
WEIGHT WITH SANY SDJ 450G TOPLIFT SPREADER | |
Overall weight | 74,100 kg |
Axle load when empty (front/rear) | 36,526/37,574 kg |
Axle load at max. load in L1 (front/rear) | 10,3500/15,600 kg |
Axle load at max. load in L2 (front/rear) | 96,300/8,800 kg |
Axle load at max. load in L3 (front/rear) | 80,700/8,400 kg |
WEIGHT WITH TOPLIFT SPREADER ELME 817 | |
Overall weight | 75,500 kg |
Axle load when empty (front/rear) | 37,926/37,574 kg |
Axle load at max. load in L1 (front/rear) | 10,4900/15,600 kg |
Axle load at max. load in L2 (front/rear) | 97,700/8,800 kg |
Axle load at max. load in L3 (front/rear) | 82,100/8,400 kg |
OUTPUT | |
Max. lifting capacity | 45,000 kg |
Stacking height with 9’6″ containers | 5 |
Stacking height with 8’6″ containers | 5 |
Lifting speed unladen/loaded | 420/250 mm/s |
Lowering speed unladen/loaded | 500/400 mm/s |
Ground speed unladen/loaded | 25/21 km/h |
Climbing power unladen/loaded | 39/28 % |
Noise level inside cab | 72 dB(A) |
Noise level outside cab | 104 dB(A) |
Tractive force | 335 kN |
SERVICE REFILL CAPACITY | |
Hydraulic oil | 900 l |
Brake oil | 150 l |
Gearbox oil | 65 l |
Axle oil | 68 l |
Final drive oil | 2×13.5 l |
Coolant | 1,6 l |
Diesel tank | 520 l |
AdBlue tank | 45 l |
Engine oil volume | 36 l |
Engine coolant | 64 l |