AllPiling machinesDrilling machinesSheet Piling and Anchor Drilling machinesKC-pilersEnergy drilling
8905 Carrier
8905 Carrier

The link between the rigs and the warehouse. A separate carrier that is used as the link between the rigs and a silo or other storage space for the lime cement on the construction site.

Junttan PM23
Junttan PM23 Extended reach pile driving machine

The Junttan PM23 is our extended reach pile driving machine. It can drive piles up to 10 meters from the center of the machine. This specialized machine offers exceptional reach and is highly suitable for pile driving in marine environments, where it is possible to perform the work from the shore instead of using barges.

Drilling machines
Nemek 810

The Nemek 810TS is an off-road foundation rig with a 7 meter mast, which can drill up to 6 meter long workpieces. This foundation rig handles all hole angles, and can be used for both foundation drilling, water drilling, energy drilling and horizontal drilling.

Klemm 806-5G
Compact and powerful drilling rig

Klemm 806-5G is a compact and powerful rig that can drill with a countersink or top hammer at all angles. Its powerful torque enables it to drill in tough geological conditions. Its compact size makes it stand out and can work in most places. Klemm 806-5G is a very versatile drilling rig that is suitable for all types of jobs and hole types.

8910 Rig
8910 KC-rig

This is our smallest KC rig. With its two internal tanks for lime cement, it is flexible and well suited to either narrow city streets or e.g. VA trenches while the strength does not prevent it from being effective on larger jobs. It has a maximum depth of 18 metres.

8911 Rig
8911 KC-rig

Well suited for our toughest assignments. The largest rig has a maximum depth of 25 metres, an internal tank with over 4m³ of lime cement and great strength. Well suited for our toughest assignments.

Pile driving machine
Banut pile driving machine 555

The Banut 555 is a highly efficient pile driving machine. It is versatile and can be used for most types of pile driving. The machine has a short setup time, is easy to transport to and from the construction site, and can handle up to 6-ton weights.

Rig Welldrill W62 Holtan
Rig Welldrill W62 Holtan

Rig for urban conditions. This rig is a good model for drilling in urban conditions and creating a minimal footprint after we have completed the drilling. It also gets well through hilly terrain in nature. This is one of the two new Welldrill W62.

Rig Welldrill W62 Borre
Rig Welldrill W62 Borre

This is one of our two new W62 rigs. With a total weight of 10 tonnes, with rubber belts and a magazine ratio, this rig normally causes minimal damage to outdoor areas and the terrain when drilling.

Rig Geawelltech 3062
Rig Geawelltech 3062

This is a light and mobile rig that comes in handy in the terrain, in the city and in gardens. This rig can produce a drilling depth down to approx. 350 meters and it is possible to produce approx. 1 hole a day. This is the oldest rig we have.

MAN Truck 2018 model
MAN Lastebil 2018 modell

The truck is extremely good to drive and enables us to easily get to difficult terrain and in tight urban areas. With our 3-axle MAN truck, we move both equipment and materials. Supplement for moving and emptying containers.

Sheet piling machine
Liebherr LRB155

The machine is equipped with a vibration-free vibratory hammer with a centrifugal force of 1160 kNm and a torque range of 0-20 kgm. It has a downward and upward force of 200 kN, providing high pushing capacity during both driving and extracting operations, even in extremely challenging ground conditions.

Drilling Machines
Nemek 407

This is a specialized rig for energy drilling. It is lightweight and equipped with rubber tracks, allowing it to access drilling locations without causing significant damage to the terrain. The rig is powerful and modern, with large storage capacity that ensures continuous drilling operations.

Comacchio mini foundation rig
Comacchio mini foundation rig

With low working height, minimal door opening requirements, and an external power unit, our new mini foundation rigs enable innovative methods of re-foundation. These mini rigs can re-foundation existing buildings without causing pollution or the need for demolition. 

Drilling Machine
Qmatec 4530 XLR

This is a Hitachi excavator-mounted drilling rig that can use 12-meter casing pipes for drilling dimensions ranging from 140mm to 610mm. It can drill up to 8 meters from the center of the machine, making it a highly flexible machine for most steel core projects.

Mini foundation rig
Klemm 702-2 mini rig

Our powerful mini rig can drill various anchor dimensions and angles and is highly efficient. Its small size and weight allow it to be lifted into small and inaccessible areas, such as pump chambers, sheet pile boxes, and culverts.

Sheet Piling Machine
Volvo EC 380 with Movax SG75-V

This excavator is specially adapted for sheet piling. The vibration-free vibratory hammer prevents vibrations from affecting the surroundings during startup and shutdown, which is the most critical frequency range for typical vibratory hammers.

Sheet piling machine
Liebherr LRB 18

The machine is equipped with a vibration-free vibratory hammer with a centrifugal force of 1160 kNm and a torque range of 0-20 kgm. It has a downward and upward force of 200 kN, providing high pushing capacity during both driving and extracting operations, even in extremely challenging ground conditions.

Drilling Machines
Nemek 510

This drilling rig is designed for challenging terrains. It can handle various drilling angles and can be used for water drilling, energy drilling, foundation drilling, and horizontal drilling. The rig offers excellent maneuverability and is quick and easy to set up for drilling on-site.

Drilling Machines
Nemek 1130 TS

A robust and versatile multifunctional drilling rig that gets the job done. The rig is designed for vertical drilling and inclined drilling up to 45 degrees. This substantial drilling rig can handle 6-meter-long drilling rods with up to a 508-millimeter diameter. Seabrokers Fundamentering has 3 of these machines.

Drilling Machine
Comacchio MC 40

The Comacchio MC40 can drill pipes up to 900mm in diameter and 12 meters in length. The MC 40 is a powerful drilling rig with a 2-speed drilling head, allowing for a maximum drilling force of 4800 Nm.

Pile driving machine
Banut pile driving machine 655

The Banut 655 is a highly efficient and powerful machine suitable for driving concrete, HP, pipe, and steel piles. It has a low transport weight, short setup time, and can handle up to 12-ton weights.