The world needs access to more sustainable energy!

Energy wells are environmentally friendly, sustainable and economically profitable. We will contribute to harvesting more of the earth’s resources – in the most careful, sustainable and environmentally friendly way. Energy wells take renewable solar energy that is stored in the ground, this provides the opportunity for both heating and cooling of properties and buildings.

We are at your service, whether it is for an industrial complex or a family home. – we can help. And perhaps best of all – energy wells are very economical and often pay for themselves in a few years.

Why geoenergy?

Geoenergy is quiet, emission-free and has a minimal impact on nature. It is about utilizing the energy that is already stored in the ground. More advanced systems can also deposit heat, so that you get both heat and cooling.

For many, it gives extra security to know that you control the access to heat to your own building. After all, it is heating that accounts for the largest share of energy use in households and buildings.

“Picture taken from Ngu.no”

Geoenergy is about extracting heat from the ground beneath us. More advanced systems can also deposit heat so that you get both heating and cooling. The possibilities are many, and the profitability is often surprisingly good. Even better – it is completely emission-free, and very energy efficient. For many, it also provides extra security to know that you control the access to heat to your own building. After all, it is heating that accounts for the largest share of energy use in households and buildings.

Energy wells utilize ground heat for heating and/or cooling buildings using a heat pump. Depending on the building’s energy needs, we drill one or more wells, often around 150-300 meters deep. It is important that the need for heating is seen in the light of the number of wells, so that the ground is not emptied faster than it naturally replenishes. Many people think of energy wells when it comes to heating buildings. It is also a cost-effective way of keeping areas snow-free/frost-free in cold seasons if there is a need for a sports facility, business park, etc.

With an energy well, you can save up to 70% of the costs associated with heating. The energy well itself has an expected lifespan of over 100 years, and the technical equipment (heat pump) often lasts for several decades before it needs to be upgraded.

A system installed in a detached house will have an average repayment period of 7-20 years, in the long term it will thus be possible to save large amounts. The same system also functions as a profitable cooling system. It is therefore important that you do not take shortcuts that cause energy stores to be depleted quickly, and the plant therefore not working.

Energy wells are also a cost-effective way of keeping areas snow-free/frost-free in cold seasons if there is a need for a sports facility, business park, etc. It is a good investment that can extend the practical life of large outdoor arenas and facilities. The possibilities are many and the profitability is often surprisingly good. Even better – it is completely emission-free and very energy efficient.

Do you have any questions? Get in touch with us! We are here to help you

We understand that it can be difficult to orientate yourself and decide what is the right way to go to meet your energy needs. We are in daily dialogue with the best in the country and ensure that you get access to the most cost-effective solution. Seabroker’s Foundations, well drilling department has extensive experience in planning and establishing energy wells and is happy to undertake a non-binding inspection. We are in daily dialogue with the best equipment suppliers in the country and ensure that you get access to the most cost-effective solution. In consultation with you, we can assess your needs and arrive at the best possible use of your land.

We are specialists in drilling energy wells and have various drilling rigs adapted to needs and ground conditions. In consultation with you, we can assess your needs and arrive at the best possible use of your land.

Feel free to contact us for a pleasant chat about underfloor heating. Together we find good solutions for your needs.

Contact information: Mikael Thorarensen, telefn +47 412 97 451. E-mail: Mikael.Thorarensen@seabrokers.no

Feel free to read more about the areas below that suit your request

Private detached house, single wells

Housing association, Lesser well park

Commercial buildings, larger well parks

17.10.2013

Renewable source for warmup of the school in Godlia in Oslo. Seabrokers EntreprenĂžr Service will do the drilling of energy wells at Godlia in the new part of the school.

18.10.2013
New mobile crane

Seabrokers EntreprenĂžr Service expand the already rich crane selection by a brand new 170 ton Grove GMK 5170.

17.11.2013
Big piling job for Seabrokers Entrepreneur Services

Seabrokers EntreprenĂžr Service has been awarded a big piling job at a project called "Tangen Ytterst" in Kristiansand, Norway.

17.12.2013
New jobs for Seabrokers Entrepreneur Services

Two new jobs for Seabrokers Entrepreneur Services. Work will commence in the second week of 2014.

06.01.2014
Seabrokers Group will develop one of Norway`s leading construction companies.

Seabrokers Group are very happy to announce that we have come to an agreement with Risa AS to buy Holt Risa AS. All the equipment, and the unique expertise represented by the employees in Holt Risa, will be transferred to Seabrokers Entrepreneur Services AS.

17.02.2014
More jobs for Seabrokers Entrepreneur Services

Piling, drilling, and energy wells on 3 different jobs.

02.04.2014
Many new jobs for the entrepreneurs

Several exciting jobs for Seabrokers Entrepreneurs

06.05.2014
New contracts for Seabrokers Entrepreneur Services

Several new contracts for Seabrokers Entrepreneurs

25.06.2014
Seabrokers Entrepreneur Services has recently achieved a lot of new jobs in different locations of the Southern Norway.

Hard work, good services and correct prices pays off, as we have achieved a lot of new jobs the last months.

20.08.2014
Several assignment from all over South Norway after Summer vacation.

Seabrokers Entrepreneur Services have had a exciting start on the "late summer" with a lot of new jobs.

20.10.2014
Seabrokers Entrepreneur Service gets exciting jobs!

Seabrokers Entrepreneur Service have contracted several jobs in different cities of South Norway.

22.01.2015
Several jobs within foundation in 2015

Several jobs that commence early 2015. One of them in the very North of Norway, in Harstad.

26.01.2015
Demanding sheet piling job at Klepp

Seabrokers Entrepreneur Service are doing a demanding job, sheet piling for a new bridge at NĂŠrland, Norway.

27.01.2015
Recruiting for the foundation branch

Seabrokers Entrepreneur Service A/S are together with MEF working towards getting fundamentation into the Norwegian school system

16.02.2015
Several foundation jobs February 2015

Several jobs for Seabrokers Entrepreneur AS Service in February.

05.03.2015
Several foundation jobs in March

Several New jobs in March for Seabrokers Entrepreneur Services AS

05.03.2015
Several foundation jobs in march

Several New jobs in March for Seabrokers Entrepreneur Services AS

16.04.2015
The entrepreneurs with several new jobs in April

Several new jobs for Seabrokers Entrepreneur Services

15.05.2015
Working on new E39 bridge in Sandnes

Seabrokers Entrepreneur Services are working at the fundamentation of new bridge on E-39 Hove-Sandved

07.07.2015
Several new jobs for Seabrokers Entrepreneur Services

Seabrokers Entrepreneur Services delivers effective and good solutions for the customers, and have a lot of new jobs.

03.11.2015
A lot of exciting contracts have been signed for Seabrokers Entrepreneur Services!

Seabrokers Entrepreneur Services / Holt Risa have signed a lot of exciting jobs for the autumn.  

10.02.2016
Seabrokers Entrepreneurs with a great start of 2016

2016 looks bright after a good start of the year. Seabrokers Entrepreneur Services are very optimistic about 2016, after record high 2015.

21.03.2016
Several new jobs for the Seabrokers Entrepreneurs

A lot of new assignments has been awarded the Seabrokers Entrepreneurs before easter.

10.06.2016
Busy summer for Seabrokers Entrepreneurs

Several new assignments toward the summer.

26.09.2016
Several new jobs for the Seabrokers Entrepreneurs

A lot of new assignments has been awarded the Seabrokers Entrepreneurs in the early autumn.

12.12.2016
Seabrokers Entrepreneur Service + Holt Risa = Seabrokers Foundation

Vi gather our forces from Seabrokers Entrepreneur Services and Holt Risa into one new company called Seabrokers Foundation.

15.12.2016
Several assignments for Seabrokers Foundation

06.03.2017
Several assignments for Seabrokers Fundamentering AS

Exciting winter for Seabrokers Fundamentering AS

23.03.2017
Good cooperation

Seabrokers Fundamentering AS was sheet piling with Seabrokers Kran & Transport AS crane

28.03.2017
Piling the new city hall

Seabrokers Fundamentering AS are piling the foundation of the new city hall in Sandnes

16.05.2017
Busy summer for Seabrokers Fundamentering AS

Several new assignments for Seabrokers Fundamentering AS

30.05.2017
Seabrokers Fundamentering AS takes over Stangelands Foundation equipment

Seabrokers has entered into an agreement with Stangeland Group to takeover all of Stangeland Foundations equipment.

06.10.2017
Busy autumn for Seabrokers Fundamentering AS

Several new assignments for Seabrokers Fundamentering AS

29.01.2018
Several new assignments for Seabrokers Fundamentering AS

Busy start of 2018 for Seabrokers Sundamentering AS

16.01.2019
Busy winter for seabrokers fundamentering as

An update on the exciting work of Seabrokers Fundamentering AS

23.01.2019
Seabrokers Fundamentering har de siste Ärene opparbeidet seg et godt fotfeste i Kristiansand, hvor vi har gjort en rekke oppdrag for ulike utbyggere.

Et av de virkelig spennende prosjektene vi har fÄtt vÊre med pÄ i Kristiansand er fundamenteringen av Kanalbyen.

23.01.2019
Tangen var en av de fĂžrste store Fundamenteringsjobbene Seabrokers Fundamentering fikk i Kristiansand.

Kristiansand er en fantastisk flott by, og Seabrokers Fundamentering er stolte over Ä ha vÊrt representert sÄ tungt i byen over sÄ mange Är.

31.01.2019
Fundamentering for 99 nye leiligheter midt i Kvadraturen er i gang!

Seabrokers Fundamentering er veldig stolte over Ă„ ha blitt valgt som fundamenteringspartner for Byhaven i Kristiansand.

11.02.2019
Fundamentering av Bystranda BlÄ

Seabrokers Fundamentering fĂ„r tilslag pĂ„ fundamenteringen av Bystranda BlĂ„! Det ”Siste gigantprosjektet pĂ„ Tangen” i fĂžlge Fedrelandsvennen

11.01.2021
Foundations of Meierikvartalet in LillestrĂžm

Seabrokers Fundamentering foundation of Romerikes highest building

28.05.2021
Rigger for videre vekst i Seabrokers Fundamentering AS

Ketil Solvik-Olsen gÄr inn som daglig leder, Svein Kverme, og Sigurdur Andri leder henholdsvis avdeling Þst og vest.

08.09.2021
Fundamentering fikk bestilling pÄ SjÞkanten i Stavanger

Seabrokers Fundamentering har fÄtt jobben med Ä fundamentere SjÞkanten Park i Stavanger kommune.

28.02.2022
Apprentice in Well and drilling

WE ARE SO PROUD to announce that Seabrokers Fundamentering is the first in Norway with an apprentice in Well and drilling.

06.04.2022
NÄ satser Seabrokers varmt pÄ geoenergi!

Seabrokers har opprettet Seabrokers GeoEnergi AS. VÄrt mÄl er Ä bli en ledende aktÞr pÄ geoenergi i Norge.

29.06.2022
Seabrokers begynner med Jet-Peling

Stort marked for Jet-Peling, starter selskap sammen med Dolomiti Rocce.

15.07.2022
KjĂžper fundamenteringsvirksomheten til Consto Dambygg AS

Seabrokers Fundamentering AS har inngÄtt avtale med Consto Dambygg AS om kjÞp av deres fundamenteringsvirksomhet. Seabrokers tilbyr arbeid til alle ansatte.

27.09.2022
Congratulations for having taken the certificate in well and drilling subject

20.12.2022
Seabrokers becomes the representative for Robbins TBM

We are proud that Robbins TBM has chosen Seabrokers Fundamentering to be their representative in the Nordic market.

30.01.2023
Seabrokers Fundamentering – fokus pĂ„ kvalitet

Det er med stor glede vi kan melde om at vi nÄ er ISO sertifisert.

13.02.2023
Livsvitenskapsbygget in Oslo

Livsvitenskapsbygget is a good example of the interaction model working, especially in projects with very complicated basic conditions.

27.10.2023
Seabrokers Fundamentering has achieved ISO 45001 and ISO 14001 certifications!

This is a significant milestone for us as a company, as it confirms our commitment to maintaining a safe and secure working environment for our employees and partners, while also taking care of the environment.

27.03.2024
Seabrokers with a project in Sweden

The Seabrokers logo appears for the first time on an international project.

18.06.2024
Seabrokers involved in a project in Italy

While Norwegian track and field stars excel at the European Championships in Rome, Seabrokers is in a project for new bridge

02.08.2024
New Manager Seabrokers Fundamentering

Ketil Solvik-Olsen steps down and Linn H. Pollard will take over as Managing Director in the company,

16.06.2025
Project KlosterĂžya

A Milestone for Seabrokers Fundamentering

04.12.2025
🚧 Join us in building the future! 🚧

Seabrokers Fundamentering and Seabrokers Geoenergi are growing – and now we need more dedicated and skilled employees!

20.04.2026

Dronningensgate - Jet grouting completed – strong foundations for the future đŸ’Ș

8910 KC-rig
8910 KC-rig

This is our smallest KC rig. With its two internal tanks for lime cement, it is flexible and well suited to either narrow city streets or e.g. VA trenches while the strength does not prevent it from being effective on larger jobs. It has a maximum depth of 18 metres.

8911 KC-rig
8911 KC-rig

Well suited for our toughest assignments. The largest rig has a maximum depth of 25 metres, an internal tank with over 4mÂł of lime cement and great strength. Well suited for our toughest assignments.

8905 Carrier
8905 Carrier

The link between the rigs and the warehouse. A separate carrier that is used as the link between the rigs and a silo or other storage space for the lime cement on the construction site.

Rig Welldrill W62 Holtan
Rig Welldrill W62 Holtan

Rig for urban conditions. This rig is a good model for drilling in urban conditions and creating a minimal footprint after we have completed the drilling. It also gets well through hilly terrain in nature. This is one of the two new Welldrill W62.

Rig Welldrill W62 Borre
Rig Welldrill W62 Borre

This is one of our two new W62 rigs. With a total weight of 10 tonnes, with rubber belts and a magazine ratio, this rig normally causes minimal damage to outdoor areas and the terrain when drilling.

Rig Geawelltech 3062
Rig Geawelltech 3062

MAN Truck 2018 model
MAN Lastebil 2018 modell

The truck is extremely good to drive and enables us to easily get to difficult terrain and in tight urban areas. With our 3-axle MAN truck, we move both equipment and materials. Supplement for moving and emptying containers.

Sheet piling machine
Liebherr LRB155

The machine is equipped with a vibration-free vibratory hammer with a centrifugal force of 1160 kNm and a torque range of 0-20 kgm. It has a downward and upward force of 200 kN, providing high pushing capacity during both driving and extracting operations, even in extremely challenging ground conditions.

Vibro IHC 14
Vibro IHC 14

Junttan PM26 LC
Junttan PM26 LC

Junttan PMX22
Junttan PMX22

The Junttan PMX22 is a very efficient piling machine

Klemm 806 Dolomiti
Klemm 806 Dolomiti

Klemm 806 is a compact and powerful rig that can drill with a countersink or top hammer at all angles. Its powerful torque enables it to drill in tough geological conditions. Its compact size makes it stand out and can work in most places. Klemm 806 is a very versatile drilling rig that is suitable for all types of jobs and hole types.

Mini foundation rig
Klemm 704 Dolomiti minirigg

Our powerful mini rig can drill various anchor dimensions and angles and is highly efficient. Its small size and weight allow it to be lifted into small and inaccessible areas, such as pump chambers, sheet pile boxes, and culverts.

Casagrande C6
Casagrande C6

Comacchio MC22
Comacchio MC22

Junttan PM23
Junttan PM23 Extended reach pile driving machine

The Junttan PM23 is our extended reach pile driving machine. It can drive piles up to 10 meters from the center of the machine. This specialized machine offers exceptional reach and is highly suitable for pile driving in marine environments, where it is possible to perform the work from the shore instead of using barges.

Pile driving machine
Banut pile driving machine 555

The Banut 555 is a highly efficient pile driving machine. It is versatile and can be used for most types of pile driving. The machine has a short setup time, is easy to transport to and from the construction site, and can handle up to 6-ton weights.

Pile driving machine
Banut pile driving machine 655

The Banut 655 is a highly efficient and powerful machine suitable for driving concrete, HP, pipe, and steel piles. It has a low transport weight, short setup time, and can handle up to 12-ton weights.

Drilling Machine
Comacchio MC 40

The Comacchio MC40 can drill pipes up to 900mm in diameter and 12 meters in length. The MC 40 is a powerful drilling rig with a 2-speed drilling head, allowing for a maximum drilling force of 4800 Nm.

Drilling Machines
Nemek 1130 TS

A robust and versatile multifunctional drilling rig that gets the job done. The rig is designed for vertical drilling and inclined drilling up to 45 degrees. This substantial drilling rig can handle 6-meter-long drilling rods with up to a 508-millimeter diameter. Seabrokers Fundamentering has 3 of these machines.

Drilling Machines
Nemek 510

This drilling rig is designed for challenging terrains. It can handle various drilling angles and can be used for water drilling, energy drilling, foundation drilling, and horizontal drilling. The rig offers excellent maneuverability and is quick and easy to set up for drilling on-site.

Drilling Machines
Nemek 407

This is a specialized rig for energy drilling. It is lightweight and equipped with rubber tracks, allowing it to access drilling locations without causing significant damage to the terrain. The rig is powerful and modern, with large storage capacity that ensures continuous drilling operations.

Sheet piling machine
Liebherr LRB 18

The machine is equipped with a vibration-free vibratory hammer with a centrifugal force of 1160 kNm and a torque range of 0-20 kgm. It has a downward and upward force of 200 kN, providing high pushing capacity during both driving and extracting operations, even in extremely challenging ground conditions.

Sheet Piling Machine
Volvo EC 380 with Movax SG75-V

This excavator is specially adapted for sheet piling. The vibration-free vibratory hammer prevents vibrations from affecting the surroundings during startup and shutdown, which is the most critical frequency range for typical vibratory hammers.

Mini foundation rig
Klemm 702-2 mini rig

Our powerful mini rig can drill various anchor dimensions and angles and is highly efficient. Its small size and weight allow it to be lifted into small and inaccessible areas, such as pump chambers, sheet pile boxes, and culverts.

Drilling Machine
Qmatec 4530 XLR

This is a Hitachi excavator-mounted drilling rig that can use 12-meter casing pipes for drilling dimensions ranging from 140mm to 610mm. It can drill up to 8 meters from the center of the machine, making it a highly flexible machine for most steel core projects.

Comacchio mini foundation rig
Comacchio mini foundation rig

With low working height, minimal door opening requirements, and an external power unit, our new mini foundation rigs enable innovative methods of re-foundation. These mini rigs can re-foundation existing buildings without causing pollution or the need for demolition. 

Drilling machines
Nemek 810

The Nemek 810TS is an off-road foundation rig with a 7 meter mast, which can drill up to 6 meter long workpieces. This foundation rig handles all hole angles, and can be used for both foundation drilling, water drilling, energy drilling and horizontal drilling.

Klemm 806-5G
Compact and powerful drilling rig

Klemm 806-5G is a compact and powerful rig that can drill with a countersink or top hammer at all angles. Its powerful torque enables it to drill in tough geological conditions. Its compact size makes it stand out and can work in most places. Klemm 806-5G is a very versatile drilling rig that is suitable for all types of jobs and hole types.