Execution
A well park has become dry using a drilling rig and compressor, 5 wells in total. Wells are drilled with 139 casing pipes down to 1 meter in good rock, cast tightly so that groundwater does not enter, then down to the desired depth. The collector is then set in the desired dimension, filled with liquid/alcohol that will draw heat out of the rock using the heat pump that drives the liquid around the system.
Hoses run from well tops to a sump, and on to a technical room with a butterfly valve

Challenges with not soiling or reducing the outdoor area during execution. Use of rubber mats

LokalitetStavanger
UtførendeSeabrokers Well drilling AS
MetoderEnergy park
Varighet2023
Omfang
  • Scope
    – Casing pipe 139 mm down ten logs into the rock, at least 1 meter.
    – Drilling of an energy well to the desired depth:
    – 5 pcs x 315 m 45 mm
    – Hx24 fluid